Tips for purchasing steel and wood doors

When we choose something that we have heard of but do not fully understand, it is easy to fall into the business's shoes. Whether it is good or not depends entirely on what others say. So, how do we choose high-quality and desirable products among the dazzling steel and wood door products? You can refer to the following purchasing tips.

1. Inspection related qualification certificates

Try to choose manufacturers with good brand reputation, and measure their product structure by checking their relevant qualifications and certifications, and comparing them with industry standards to see if they are complete and authentic. Before installation, pay attention to checking the internal materials of the door lock hole for final inspection.

2. Touch and see

Consumers are unlikely to go to the manufacturer to observe how the product is processed, and can only evaluate the process quality of the product through simple visual inspection methods. Here are two ways to teach you: hand touch and side light viewing. Touch the frame, panel, and corners of the steel and wood door with your hand, ensuring no scratches, softness, and delicacy. Then stand on the side of the steel and wood door and face the light to see if there are any bumps or waves on the paint surface of the door panel. Basically, these two factors can determine whether the workmanship is qualified.

3. Look at the material of steel and wood door frame panels

The materials for steel and wood door frames on the market are generally divided into four types. There are multi-layer veneer door frames, density board door frames, steel door frames, and multi-layer board UV paint veneer door frames. The quality and service life of different door frames vary. When choosing, pay attention to the material of the door frame and choose high-quality door frame materials.

It is recommended that consumers choose the material of steel and wood door frames based on the humidity of the indoor air. If the indoor air is relatively humid, it is best not to purchase steel and wood door frames with low moisture resistance.

4. Check the thickness of the steel plate

The thickness of the steel plate is the part that best reflects the quality of the product, so when choosing a door leaf, attention should be paid to the thickness of the steel wood door composite steel plate. To achieve a flat, smooth, and stable product surface, the thickness of the steel plate should reach 0.5mm and above, in order to achieve good results in collision and impact resistance. If the thickness of the steel plate is less than 0.5mm, it is considered a low-quality steel wood door.

5. Look at the hardware of steel and wood doors

Choosing steel and wood doors should not be taken lightly. Each steel and wood door needs to choose the right hardware to match it. The hardware to match the door can be divided into hinges, door suction, and locks. The material of the hardware should be alloy or stainless steel, especially the hinges. It is best to use stainless steel sub mother hinges. The gap between the door leaf and the frame installed with sub mother hinges is small, which is more beautiful.