Bulletproof Doors Have A High Level Of Safety

Bulletproof door is a special type of anti-theft door, which has the characteristics of anti prying, strong impact resistance, high safety, and durability. This type of door is made of special materials and will not explode when damaged. The glass of bulletproof doors is usually made of bulletproof glass, with a thickness between 12mm and 15mm, which is stronger and more durable than ordinary tempered glass, with an impact resistance of up to 400kg/cm2.

Bulletproof doors usually include left and right door leaves. There is a left shockproof glass partition on the left side of the left door leaf, and a right shockproof glass partition on the right side of the right door leaf. The door is also equipped with hardware accessories such as handles, door locks, observation holes, as well as password protection locks, electronic alarm password systems, doorbell calling devices, etc., to ensure the safety and convenience of the door.

When installing bulletproof doors, it is necessary to first measure the size of the door opening and determine the direction of opening. The size of the door opening should be larger than the size of the installed door, and there should be a certain amount of clearance to facilitate debugging and correction during installation. During the installation process, it is necessary to place the door into the door hole, plug it tightly with wooden bolts around, correct the level and verticality, and adjust whether it can be opened flexibly. Then open the door leaf, drill installation holes through the door frame installation holes with an electric hammer, and tighten them one by one with expansion bolts. The depth of the expansion bolt drilling into the wall should be ≥ 5cm, and the drill bit of the impact hammer should match the size of the expansion bolt.

Bulletproof doors not only have high safety, but also have a beautiful appearance and long service life. Therefore, it is widely used in places that require high security, such as banks, jewelry stores, museums, and important institutions. At the same time, with the continuous progress of technology and the increasing demand for safety, the design and manufacturing of bulletproof doors are also constantly innovating and improving to meet the requirements of different places and safety needs.